Campanula lactiflora

Plant Profile & Key Characteristics

Overview: Campanula lactiflora (milky bellflower) is a herbaceous perennial bellflower (family Campanulaceae) reaching 90–150 cm (3–5 ft) tall (source lists 30–50 cm). Tall, upright clump-forming border perennial with airy, branching flower stems.

Quick Specifications

Specification	Attribute
Plant Type / Life Cycle	Herbaceous perennial (sometimes grown as an annual)
Foliage Type	Deciduous (herbaceous, dies back in winter)
Mature Size	90–150 cm (3–5 ft) tall (source lists 30–50 cm)
Growth Rate	Moderate to fast
Toxicity	Non-toxic; young leaves and flowers of many bellflowers are edible
Hardiness	USDA zones 3–9

Growth Form & Structure

• Height & Spread: In the ground it reaches 90–150 cm (3–5 ft) tall (source lists 30–50 cm); also grows well in large pots and containers.
• Growth Habit & Form: Tall, upright clump-forming border perennial with airy, branching flower stems.
• Lifespan & Maturity: A perennial that reaches full height within a year or two; it flowers each year and produces dry seed capsules rather than fleshy fruit.

Anatomy & Physical Features

• Leaves & Foliage: Green, heart-shaped leaves with serrated margins.
• Flower Characteristics: Open, star-faced bells in purple, blue, pink or white, massed on branching heads.

Primary Uses & Landscape Value

• Edible Uses: Young leaves and flowers of many bellflowers are edible, used raw as a mild salad green or garnish.
• Functional & Ornamental Roles: Ornamental for the back of borders and cottage gardens; also a cut flower.

Care Guide: Planting, Soil & Watering

Overview: Campanula lactiflora is a cool-climate bellflower that performs best in a humus-rich, moisture-retentive soil that still drains freely, with steady, even moisture through the growing season. Give it an open, fertile bed in full sun to part shade and it settles in quickly as a low ornamental ground cover.

Quick Care Requirements

Requirement	Ideal Condition
Planting Season	Spring, after the last frost, through early summer
Growth Rate	Moderate to Fast
Soil Type	Well-draining, moisture-retentive, humus-rich soil
Water Need	Moderate to High – keep evenly moist, never waterlogged

Planting & Establishment

• Best Planting Season: Plant in spring once the danger of frost has passed and the soil has begun to warm, continuing into early summer. Within its hardiness range (zones 3-9), the cool, mild weather it favours at planting time gives the fastest establishment.
• How to Plant:
  • Hole Preparation: Dig a hole about twice as wide as the root ball and no deeper, loosening the surrounding soil so the fine roots can spread out easily.
  • Soil Amendments: Work in compost or well-rotted organic matter to enrich the bed, and on heavy ground add coarse grit or sand to sharpen drainage.
  • Planting Depth: Set the plant so the root collar sits level with the surrounding soil surface – do not bury the crown or stem, which invites rot.
• Growth Speed & Expectations: In cool, moist, well-drained conditions expect moderate to fast growth, with the plant knitting together into a spreading mat of foliage over its first season.

Soil, Watering & Drainage Care

• Soil Mix & Drainage Needs: Aim for an open, aerated soil that holds moisture yet drains freely; in a container use a quality potting mix lightened with grit or perlite, and always ensure drainage holes so water never pools around the roots and causes rot.
• Watering Schedule & Technique:
  • Young / Newly Planted: Water in well at planting and keep the soil consistently moist while the roots establish, watering whenever the top of the soil starts to dry.
  • Established: Water deeply and regularly so the soil stays evenly moist through the growing season, letting only the very surface dry between waterings.
  • Seasonal Adjustments: Increase watering during hot, dry spells, and cut back in the cooler months when growth slows and the soil holds moisture longer.

Climate, Light & Hardiness

Campanula lactiflora (Milky bellflower) is a cool-climate bellflower that performs best in temperate and Mediterranean conditions, taking full sun where summers stay mild and welcoming light afternoon shade in hotter regions. It is a hardy herbaceous perennial rated for USDA zones 3–9, so winter cold is rarely the limiting factor—prolonged summer heat and humidity tend to be the greater challenge.

Quick Climate Specifications

Climate Zones	Temperate, Mediterranean, Subtropical
USDA Hardiness Zones	3–9
Optimal Temp Range	Approximately 15–24 °C (59–75 °F)
Cold Damage Begins	Hard frost may cut back foliage; the crown stays hardy
Approx. Survival Minimum	Established plants tolerate deep cold to roughly the zone 3 limit (about −37 °C / −34 °F)
Frost Tolerance	High (hardy perennial crown)
Light Conditions	Full sun to partial shade
Wind Tolerance	Moderate

Sunlight & Light Exposure

Optimal Light Setup

In cool and temperate gardens this bellflower flowers most freely in full sun, ideally with several hours of direct light each day. Where summers are hot, a position that receives bright morning sun and some shade through the afternoon keeps the foliage fresh and extends the flowering display.

Direct Sun Requirement

Full, all-day sun is well tolerated in mild, maritime, and northern climates and generally improves compactness and bloom. In Mediterranean and subtropical heat, intense midday and afternoon sun can scorch leaves and shorten flowering, so unbroken direct sun is best reserved for the cooler parts of the day.

Shade & Heat Management

Light or dappled afternoon shade is beneficial in hot regions and helps prevent leaf scorch and premature flower fade. Too much shade, however, leads to weak, leggy growth and sparse flowering, so aim for bright conditions rather than deep shade.

Best Exposure / Orientation

In cool climates an open, south- or west-facing spot suits it well. In hot climates an east- or north-facing aspect—morning sun with afternoon protection—gives the most reliable results.

Temperature Extremes & Hardiness

USDA Hardiness & Regional Limits

The site data rates this species for USDA hardiness zones 3–9, meaning established plants withstand very cold winters at the lower end of that range. The zone 9 upper limit reflects heat rather than cold: in the warmest zones performance depends on cooler siting, and regions with mild summers give the strongest growth.

Cold Damage & Winter Protection

As a herbaceous perennial it naturally dies back over winter in cold climates and re-sprouts from the crown in spring, so top-growth loss to frost is normal rather than a problem. A light winter mulch protects the crown in the coldest zones, and container-grown plants benefit from extra shelter because their root zone freezes faster than open ground. Cold tolerance can vary with cultivar, plant age, exposure duration, and local conditions, and young plants are more sensitive than established ones.

Frost Sensitivity

The soft foliage is sensitive to hard frost and may blacken or collapse, but the underground crown is frost-hardy and recovers. In frost-free or nearly frost-free climates the plant can stay evergreen and near-continuously in growth, whereas in cold winters it behaves as a dieback perennial.

Extreme Heat Tolerance

Heat is the main constraint for this cool-season bellflower. Prolonged high temperatures, especially combined with humidity, reduce vigour, cut short the flowering period, and can stress the plant; afternoon shade, good air movement, and a cool root run all help it cope through the hottest weather.

Wind, Humidity & Microclimate

Humidity Preferences

Moderate humidity suits it best. Hot, muggy, stagnant air is the least favourable combination and can encourage foliage problems, so it is happiest where warmth is tempered by fresh, moving air.

Dry-Air Tolerance

Moderately dry air is tolerated in cool conditions, but hot, dry winds can scorch the thin leaves and flowers. In such settings a sheltered, lightly shaded position protects the foliage.

Wind Tolerance

The low basal foliage is fairly wind-tolerant, but the taller flowering stems of this species can flop or snap in exposed, windy sites and benefit from a sheltered spot or discreet support.

Rainfall & Seasonal Moisture

As a climatic preference it is suited to regions with regular, fairly even moisture and mild summers rather than long, hot, dry seasons. In dry-summer Mediterranean and subtropical climates, cooler and lightly shaded siting compensates for the greater seasonal heat and moisture stress.

Microclimate Recommendations

A cool root run with bright light—morning sun and afternoon shade in hot areas—creates an ideal pocket for this plant. Good air circulation helps limit spider mites and fungal issues, and its compact habit makes it easy to place in containers and raised spots, though those root zones heat and freeze faster than open ground.

Growing in Pots, Balconies & Indoors

Campanula lactiflora is an upright, border-type bellflower that also grows well in a deeper pot on a patio or balcony. The grower notes it is not a true indoor houseplant – like most bellflowers it wants full sun to half shade and cool, airy conditions that a warm living room can’t give – but it grows very well in a container on a patio or balcony, and a compact plant can be kept on a bright, cool windowsill.

Quick Details

• Container Size: A medium, reasonably deep pot (roughly 3-7 L / 20-25 cm / 8-10 in across) to support the taller flowering stems.
• Indoor Suitability: Not a deep-room houseplant; fine on a bright, cool, sunny windowsill and excellent as an outdoor container plant.
• Best Spot: Full sun to half shade on a patio or balcony; in windy spots the taller stems may need light staking.
• Soil & Drainage: Gritty, free-draining mix; alpine bellflowers dislike wet feet.
• Watering in Pots: Keep evenly moist through the growing season (it likes a good drink) but never waterlogged – pots dry faster than open ground, so check often in warm weather.

Indoors & On the Windowsill

• Houseplant limits: The grower marks it as not a houseplant. Deep in a warm room the light is too weak and the air too still, so growth is leggy and flowering is poor.
• Windowsill growing: A bright, cool windowsill with a few hours of direct sun is a different story – there a compact plant can flower well. Keep it cool and airy, and turn the pot now and then for even growth.
• Overwintering: In cold climates a potted plant is easy to shelter – move it to a cold but frost-free spot (an unheated porch, cold frame or bright cool windowsill) over winter, keep it barely moist, and return it outside once hard frosts pass.

On a Balcony or Patio

• Light & wind: Give it a bright spot with sun for part of the day. Walls, railings and paving reflect heat and dry small pots quickly, so check moisture daily in warm, breezy weather.
• Support: The flowering stems are taller than the alpine bellflowers, so on an exposed balcony give them light staking or a sheltered corner to prevent wind-rock.
• Practicalities: These are light, small containers that are easy to place; still stand pots so drainage water runs away freely rather than pooling on the balcony floor.

Choosing the Pot, Soil & Long-Term Care

• Pot & drainage: Use a pot with strong drainage holes and skip a standing-water saucer, which invites root rot. Terracotta breathes and dries fast (ideal for these grit-lovers); glazed or plastic holds moisture longer, so water more sparingly if you use it.
• Potting mix: A free-draining, aerated mix – a good potting/loam-based compost lightened with plenty of perlite, coarse grit or vermiculite. A gravel mulch over the surface keeps the neck dry and sets off the flowers.
• Feeding: Potted plants need feeding more often than those in the ground, as watering leaches nutrients away; a weak balanced liquid feed every few weeks through the growing season is plenty – don’t overfeed alpines.
• Repotting: Refresh the mix or pot on about every couple of years. For these perennials, divide or lightly trim the clump and shear off spent flowers to keep it neat and encourage more bloom.

Bloom & Edible Flower Guide

Quick Details

• Bloom Season: Late spring through summer; in mild climates the display can carry on toward winter
• Flower Appearance: Bell- to star-shaped flowers in purple, blue, pink or white, carried at the stem tips
• Edibility: The flowers are edible – mild and slightly sweet, they make a pretty garnish for salads and desserts

Detailed Blooming Overview

Milky bellflower forms tall, airy sprays of bell- to star-shaped flowers at the top of the stems, in shades of purple, blue, pink and white. It blooms generously from late spring into summer, and where winters are gentle the show can extend much later.

Flower Characteristics

• Bell-and-star shaped flowers borne in clouds at the stem tips.
• Colours range across purple, blue, pink and white.

Bloom Care & Thinning

• Prolonging the display: Deadheading spent flowers encourages a longer, fuller season of bloom.
• Pollination: Bees and other pollinators work the open bells.

Bloom Health & Protection

• Slugs and snails: They are fond of bellflower shoots and blooms – a barrier of grit or an evening patrol helps.
• Powdery mildew: In humid, crowded plantings it can dust the leaves; better spacing and airflow, or a sulfur-based fungicide, keeps it in check.

Pests, Diseases & Troubleshooting

Overview: This is a tall border bellflower, so its two defining issues are staking and rust: heavy flowering stems flop and snap without support, and warm humid air brings on rust, powdery mildew and aphid colonies on the dense heads. Good spacing, airflow and timely support handle most of it, keeping sprays as a backstop.

Quick Troubleshooting Overview

Issue / Pest	Main Symptom	Primary Solution
Floppy, leggy stems	Plant splays and snaps in wind/rain	Stake early, full sun, avoid excess nitrogen
Rust	Orange pustules under leaves, yellowing	Remove infected leaves, airflow, sulfur/copper
Aphids	Sticky, distorted flowering heads	Water jet, predators, insecticidal soap
Powdery mildew	White powder on upper leaves late season	Space plants, water at base, sulfur if needed
Two-spotted spider mite	Stippled, bronzed leaves in heat	Raise humidity, rinse foliage, soap/oil
Slugs & snails	Ragged holes in spring shoots	Grit/copper barriers, ferric pellets

Common Pests & Management

• Aphids (Aphis spp., Myzus persicae):
  • Symptoms: Dense colonies of soft green, grey or black insects clustered on shoot tips, flower stalks and the undersides of young leaves. They cause distorted, curled or stunted new growth, a coating of sticky honeydew, and secondary sooty mould; they can also transmit viruses. Look for shed white skins and attending ants.
  • Prevention & Control: Cultural first: dislodge colonies with a firm jet of water, pinch out badly infested tips, and avoid over-feeding with high-nitrogen fertiliser (soft growth attracts them). Protect and encourage ladybirds, hoverfly and lacewing larvae, and parasitic wasps. If needed, treat with insecticidal soap or a light horticultural/neem oil, coating the undersides; spray in the evening to spare pollinators.
• Slugs & Snails (Deroceras reticulatum, Cornu aspersum):
  • Symptoms: The number-one enemy of young bellflowers. Ragged holes with irregular margins chewed from the centre and edges of soft new leaves, whole seedlings and emerging shoots grazed to stubs overnight, and tell-tale silvery slime trails over foliage and soil. Damage is worst in spring, in damp weather, and on tender alpine or basal-rosette growth.
  • Prevention & Control: Cultural first: clear leaf litter, boards and pot rims where they shelter, water in the morning so foliage dries by night, and hand-pick after dark or after rain. Ring vulnerable crowns with a physical barrier of sharp grit, crushed shell, copper tape or wool pellets. Encourage predators (ground beetles, frogs, thrushes). If pressure is high, scatter iron-phosphate (ferric) pellets sparingly, or apply parasitic nematodes (Phasmarhabditis) to moist soil.
• Two-spotted Spider Mite (Tetranychus urticae):
  • Symptoms: A hot, dry-weather and indoor pest. Leaves take on a pale, dull, finely stippled or bronzed look, later yellowing and drying from the tips; in heavy attacks fine silken webbing spans leaf axils and shoot tips. Tiny moving specks are visible on the undersides with a hand lens.
  • Prevention & Control: Cultural first: raise humidity and avoid drought stress, rinse foliage undersides with water, and isolate infested container plants. Introduce predatory mites (Phytoseiulus persimilis) under cover. If needed, apply insecticidal soap or horticultural oil with thorough underside coverage, repeating to catch newly hatched mites; rotate products to avoid resistance.
• Thrips (Frankliniella occidentalis):
  • Symptoms: Slender straw-coloured insects that rasp leaf and petal surfaces, leaving silvery-white flecking, fine black faecal specks, and distorted or streaked new growth and buds. They also vector viruses.
  • Prevention & Control: Cultural first: remove weeds and spent flowers that harbour them, keep plants unstressed, and hang blue sticky traps to monitor and reduce numbers. Introduce predatory mites (Amblyseius spp.) or lacewings under cover. If needed, spray insecticidal soap, spinosad or neem, targeting growing points; treat in the evening to protect bees.
• Froghoppers / Spittlebugs (Philaenus spumarius):
  • Symptoms: Frothy white ‘cuckoo-spit’ blobs on stems and leaf axils in late spring and summer, protecting a soft green nymph inside. Feeding causes minor wilting or slight leaf distortion but is largely cosmetic; adults are harmless leaf-hoppers.
  • Prevention & Control: Cultural first: this pest rarely warrants chemicals. Simply wash the spittle and nymphs off with a strong jet of water where numbers are high or unsightly. Keep plants healthy; no insecticide is normally justified.

Diseases & Fungal Issues

• Rust (Coleosporium tussilaginis, Puccinia spp.):
  • Symptoms: The signature bellflower disease. Bright orange, brown or rusty-red powdery pustules erupt mainly on leaf undersides, with matching yellow blotches above; heavy infection yellows, distorts and kills leaves and weakens the plant. Worst in warm, humid, crowded conditions.
  • Treatment & Management: Remove and bin (do not compost) infected leaves at first sign, and clear all foliage debris in autumn to break the cycle. Space and divide plants for airflow, water at the base to keep foliage dry, and avoid overhead irrigation. Grow resistant species/cultivars where rust is chronic. If needed, apply a sulfur or copper fungicide, or a myclobutanil-type product, on a preventative schedule.
• Powdery Mildew (Golovinomyces / Erysiphe spp.):
  • Symptoms: A white to greyish powdery film on the upper leaf surface, stems and buds, often in late summer or under dry-root/humid-air stress; leaves yellow, curl and drop, and growth is stunted.
  • Treatment & Management: Improve airflow by spacing and thinning, avoid drought stress at the roots, and cut out badly affected shoots. Water the soil, not the leaves. A milk spray or potassium-bicarbonate solution helps early; for persistent cases use sulfur or a suitable fungicide, avoiding sulfur in high heat.
• Southern Blight / Sclerotinia Crown Rot (Sclerotium rolfsii, Sclerotinia sclerotiorum):
  • Symptoms: Sudden wilting and yellowing of a whole plant or crown, with a soft brown rot at the stem base. A white cottony fungal mat may spread over the soil surface, bearing tan-to-black mustard-seed-sized sclerotia (or larger black bodies for Sclerotinia). Common in warm, wet, mulch-heavy soil.
  • Treatment & Management: There is no easy cure once established: remove and destroy affected plants together with the surrounding soil and any sclerotia. Keep mulch off the crown, improve drainage, avoid burying stems, and rotate away from the spot. Solarising the soil and adding well-composted organic matter (encouraging antagonistic microbes) reduces recurrence.
• Ramularia / Septoria Leaf Spot (Ramularia / Septoria spp.):
  • Symptoms: Small round-to-angular brown or purplish spots, sometimes with pale centres and dark margins, scattered over the leaves; spots merge in wet spells and lower leaves yellow and drop. Cosmetic at low levels but weakening if severe.
  • Treatment & Management: Pick off and bin spotted leaves, clear fallen debris, and water at the base to keep foliage dry. Space plants for quick drying after rain or dew. Copper-based fungicide gives control where the problem is persistent; rarely needed on vigorous plants.
• Crown & Root Rot (Pythium, Phytophthora, Rhizoctonia):
  • Symptoms: The classic killer of alpine and rockery bellflowers. Plants wilt, blacken and collapse from the base; the crown and roots turn brown, soft and mushy, often with a foul smell, and the top lifts away from rotted roots. Driven by waterlogged, heavy or poorly drained soil, especially over winter.
  • Treatment & Management: This is a cultural, not a spray, problem. Plant in sharply drained, gritty soil, on a slope, raised bed or scree, with a collar of grit around the neck to keep the crown dry. Never overwater or let pots stand in water, and site alpines out of winter wet. Remove and destroy collapsed plants; propagate healthy offsets into fresh, open mix. Biological drenches (Trichoderma) can help prevention but cannot reverse an established rot.

Growing Difficulties & Abiotic Problems

• Floppy, Leggy Growth & Support:
  • Cause & Symptoms: Tall border bellflowers flop, splay open from the centre and snap in wind and rain, especially when grown too rich, too shaded, or top-heavy with bloom.
  • Correction Strategy: Site in full sun to light shade and avoid excess nitrogen, which produces soft, weak stems. Insert twiggy pea-sticks or link-stakes early so plants grow up through the support, or grow through a grid. Cutting back after the first flush gives sturdier re-growth and often a second flowering.
• Heat & Humidity Collapse:
  • Cause & Symptoms: Cool-climate and taller bellflowers wilt, scorch at the leaf edges and finish flowering fast in prolonged heat and muggy nights; alpine cushions can bake and brown on hot, exposed sites.
  • Correction Strategy: Provide light afternoon shade in hot regions, mulch to keep roots cool and evenly moist, and ensure airflow to reduce humidity-driven disease. Deadhead and lightly water in the cool of the day; choose heat-tolerant species where summers are severe.
• Winter Wet & Crown Rot:
  • Cause & Symptoms: The single biggest cause of losing alpine and dwarf bellflowers. Cold combined with standing moisture at the crown over the dormant season rots the neck and roots, and a healthy-looking plant simply fails to reappear or collapses in early spring.
  • Correction Strategy: Drainage is everything: plant on a slope, raised bed, wall or scree, in gritty soil, and topdress the crown with a generous collar of sharp grit or gravel. In wet climates a pane of glass or cloche over choice cushions keeps winter rain off. Avoid heavy, clay-rich pockets.
• Chlorosis (Nutrient / pH Imbalance):
  • Cause & Symptoms: Yellowing leaves with green veins signal iron or manganese lock-out, usually from the wrong pH or waterlogged roots; overall pale, weak growth points to nitrogen shortage in poor soil.
  • Correction Strategy: Match the soil to the species (most tolerate neutral to alkaline soil, but acid-loving alpines such as scree species need lime-free, gritty mix). Correct drainage first, then feed with a balanced fertiliser and, for lime-induced yellowing, apply chelated iron and improve soil structure.

What Helps — Products & Tools

For this tall border bellflower, the key aids are physical support (link-stakes, pea-sticks or grids) and disease hygiene. Insecticidal soap and horticultural/neem oil control aphids, mites and thrips; sulfur or copper fungicide, or a myclobutanil-type product, manages rust, powdery mildew and leaf spot. Grit or ferric pellets keep spring slugs off new shoots.

Fertilizing & Feeding

This bellflower is a moderate feeder that responds to light, steady feeding through the active growing season and needs little to none while it rests over winter.

Quick Fertilizing Specs

Feeding Level	Moderate
Main Nutrient Priority	Balanced feeding with adequate nitrogen; avoid excess
Best Feeding Period	Active growth through the spring and summer bloom
Soil pH	Near neutral to slightly acidic; tolerates a range
Organic Options	Compost and other organic matter worked into the soil
Reduce/Stop Feeding	Ease off as growth slows into autumn and winter

Feeding by Growth Stage

Spring growth flush

Support vigorous new stems and foliage as growth resumes in spring.

Nutrient direction	A balanced, complete fertilizer to fuel leafy growth heading into bloom.
Timing	As new growth emerges in spring.
Frequency	Light, steady feeding through the active growing season.
Fertilizer types	A balanced complete garden fertilizer, Compost or other organic matter worked in at planting
Precautions	Avoid heavy nitrogen, which pushes soft leafy growth at the expense of flowers.

Blooming period

Sustain flowering through the spring and summer bloom.

Nutrient direction	Keep feeding balanced; adequate nitrogen in a complete fertilizer supports continued bloom.
Timing	Through the flowering period in spring and summer.
Frequency	Continue light feeding while the plant is actively blooming.
Fertilizer types	A balanced complete fertilizer
Precautions	Skip high-phosphorus ‘bloom booster’ products; balanced feeding and good light drive flowering.

Dormancy / winter rest

Let the plant rest without stimulating tender growth.

Nutrient direction	None — withhold fertilizer while the plant is dormant.
Timing	Late autumn through winter as growth stops.
Frequency	No feeding at this stage.
Fertilizer types	No feeding at this stage — withhold fertilizer during dormancy.
Precautions	Do not fertilize until active growth resumes in spring.

Nutrient Deficiency Signs & Corrections

Uniform yellowing of older, lower leaves with slowed growth.

Possible causes	Low nitrogen availability in the soil, Waterlogged or compacted roots limiting uptake, Nutrients leached from container mixes by frequent watering
Appears first on	Older, lower leaves
What to check	Recent feeding history and overall soil fertility, Drainage and how wet the root zone stays
Possible correction	Apply a balanced complete fertilizer and improve drainage; correct watering habits.

Yellowing between the veins of the youngest leaves while the veins stay green.

Possible causes	Iron or manganese made unavailable by high soil pH, Poor drainage and over-watering stressing the roots, Cold, wet soils slowing micronutrient uptake
Appears first on	New growth at the stem tips
What to check	Soil pH and drainage, Whether the symptom tracks the newest leaves
Possible correction	Correct soil pH and drainage; apply a chelated iron product per its label if needed.

Browning, scorched leaf edges, most noticeable on container plants.

Possible causes	Fertilizer salt buildup in the root zone, Under-watering or inconsistent moisture, Restricted, pot-bound roots in containers
Appears first on	Leaf margins of mature leaves
What to check	Feeding rate and any white salt crust on the soil or pot, Watering consistency and root congestion
Possible correction	Ease back on fertilizer, water thoroughly to flush accumulated salts, and repot congested plants.